崗位描述：
投標階段：
1. 編寫整條生產線電氣設備的供貨范圍，包括輔助設備及整合與生產線相關的各種公輔設備。定義范圍將包括：高壓/中壓電力供應、高壓/低壓電力變壓器、低壓配電、馬達控制中心、電動機及傳動，生產線自動化及驅動規則、與各分包商之間的界面等。
2. 計算公司提供設備所需的電機機械動力和/或轉矩，檢查/校正各分包商提供的運輸電機。
3. 準備“電機清單”（包括給分包商的進線清單，用于設備和自動控制的電機清單、儀表清單）。
4. 編寫向分包商詢價的電氣部分的技術規格書（基本數據、總體功能、工作范圍）。
5. 向各電氣制造商進行詢價。
6. 擬定或校訂主供應商及各分包商的電氣、自動化和儀器的技術規格書。
7. 比較各主電氣供應商的報價及供貨范圍 。
項目階段（訂貨階段）：
1. 校訂最終的電機清單。
2. 主電氣供應商最終的電氣&自動化的供貨/工作范圍的校訂, 也包括各分包商之間的電氣供貨范圍及電氣/自動化界面。
3. 引導、校訂和控制生產線電氣控制的總體布局。
4. 單線圖。
5. 物理位置。
6. 電氣室及主控制臺所需空間。
7. 機旁控制臺或控制板的位置。
8. 接線盒的位置。
9. 事故停車盤或箱的位置。
10. 電纜隧道、電纜溝、電纜管道的實際位置，及檢查電氣供應商所作的布局安排。
11. 檢查與液壓或氣動管道的最終干擾情況。
12. 協調各電氣和自動化分包供應商之間的關系。
13. 檢查各分包供應商提供的電氣和自動化設備。
14. 編制功能描述（根據已有文件）。
15. 確定最終的生產線各部分的各個牽引部分的清單。
16. 引導各個分供應商的工作（電氣項目管理）。
17. 幫助解決現場出現的任何問題。
崗位要求：
1. 電氣方面的全能型人才及具有技術協調能力。
2. 具有中壓和低壓電器經驗，及電機、傳動和自動化方面的經驗，包括工業用邏輯控制程序。
3. 參加過電氣設備投標或具有電氣項目技術會議的經驗。
4. 具有鋼鐵業承包商的工作經驗或為類似鋼鐵設計研究院的工作經驗。
5. 能夠用英語流利的交流和書寫。
6. 能夠適應國內外經常出差。
High Level Electrical Engineer (1 vacancy)
Job description：
Tendering stage：
1. Prepare the Scope of Supplies of the complete line equipment including auxiliaries and integrating the various line directly related utilities. The scope definition will include: HV/MV electrical power supply, HV/LV Power transformers, LV power distribution, Motor Control Centres, Electrical Motors and drives, Line Automation and traction regulation, interfacing with various sub-vendors, etc.
2. Calculation of required Motor Mechanical Power and/or torque of equipment supplied by CMI and checking/correction of line transport motors of various sub-vendors.
3. Prepare the “motor list” (including list of feeders for sub-vendors, list of motors, list of instruments for CMI equipment and automation exchanges).
4. Prepare the electrical portion of technical specification (basic data, general functions, scope of work) of enquiries to various sub-vendors.
5. Issue enquiries to various electrical makers.
6. Prepare or revise the technical specification for electrical, automation and instrumentation of Main electrical supplier and of the various sub-vendors.
7. Compare the prices and scopes of various main electrical suppliers quotations.
Project stage (order stage) ：
1. Revise the final motor list.
2. Revise of final scope of supply/works of electrical & automation of main electrical supplies including electrical scope and electrical / automation interface of each sub-vendor.
3. Pilot, revise and control the electrical control general arrangement of the line.
4. Single line diagrams.
5. Physical location.
6. Space needed for Electrical rooms and main control pulpits.
7. Location of local control pulpits or panels.
8. Location of junction boxes.
9. Location of emergency stops panels or boxes.
10. Physical location of cable tunnels, cable trenches and cable pipes and checking of the arrangements made by Electrical supplier.
11. Checking for eventual interferences with hydraulic or pneumatic pipings.
12. Co-ordination between the various sub-suppliers electrical and automation.
13. Inspection of the various sub-vendors equipment electrical and automation portion.
14. Make the functional description (based on already existing documents).
15. Finalise the list of the various tractions in the various line section.
16. Pilot the sub-vendors work (project management of electrical).
17. Help solve the electrical problems on site if any.
Position requirement：
1. The work is more for a generalist and technical co-ordinator.
2. Priority is given to people having a minimum experience for electrical MV & LV, motors and drives and automation including PLC's.
3. Experience in participating to tender or project meetings for electrical portion is a definite asset.
4. Experience of work on similar functions for steel contractors or for a Steel Design and Research Institute is a definite plus.
5. Able to write and speak English fluently.
6. Able to travel extensively at home and abroad.
投標階段：
1. 編寫整條生產線電氣設備的供貨范圍，包括輔助設備及整合與生產線相關的各種公輔設備。定義范圍將包括：高壓/中壓電力供應、高壓/低壓電力變壓器、低壓配電、馬達控制中心、電動機及傳動，生產線自動化及驅動規則、與各分包商之間的界面等。
2. 計算公司提供設備所需的電機機械動力和/或轉矩，檢查/校正各分包商提供的運輸電機。
3. 準備“電機清單”（包括給分包商的進線清單，用于設備和自動控制的電機清單、儀表清單）。
4. 編寫向分包商詢價的電氣部分的技術規格書（基本數據、總體功能、工作范圍）。
5. 向各電氣制造商進行詢價。
6. 擬定或校訂主供應商及各分包商的電氣、自動化和儀器的技術規格書。
7. 比較各主電氣供應商的報價及供貨范圍 。
項目階段（訂貨階段）：
1. 校訂最終的電機清單。
2. 主電氣供應商最終的電氣&自動化的供貨/工作范圍的校訂, 也包括各分包商之間的電氣供貨范圍及電氣/自動化界面。
3. 引導、校訂和控制生產線電氣控制的總體布局。
4. 單線圖。
5. 物理位置。
6. 電氣室及主控制臺所需空間。
7. 機旁控制臺或控制板的位置。
8. 接線盒的位置。
9. 事故停車盤或箱的位置。
10. 電纜隧道、電纜溝、電纜管道的實際位置，及檢查電氣供應商所作的布局安排。
11. 檢查與液壓或氣動管道的最終干擾情況。
12. 協調各電氣和自動化分包供應商之間的關系。
13. 檢查各分包供應商提供的電氣和自動化設備。
14. 編制功能描述（根據已有文件）。
15. 確定最終的生產線各部分的各個牽引部分的清單。
16. 引導各個分供應商的工作（電氣項目管理）。
17. 幫助解決現場出現的任何問題。
崗位要求：
1. 電氣方面的全能型人才及具有技術協調能力。
2. 具有中壓和低壓電器經驗，及電機、傳動和自動化方面的經驗，包括工業用邏輯控制程序。
3. 參加過電氣設備投標或具有電氣項目技術會議的經驗。
4. 具有鋼鐵業承包商的工作經驗或為類似鋼鐵設計研究院的工作經驗。
5. 能夠用英語流利的交流和書寫。
6. 能夠適應國內外經常出差。
High Level Electrical Engineer (1 vacancy)
Job description：
Tendering stage：
1. Prepare the Scope of Supplies of the complete line equipment including auxiliaries and integrating the various line directly related utilities. The scope definition will include: HV/MV electrical power supply, HV/LV Power transformers, LV power distribution, Motor Control Centres, Electrical Motors and drives, Line Automation and traction regulation, interfacing with various sub-vendors, etc.
2. Calculation of required Motor Mechanical Power and/or torque of equipment supplied by CMI and checking/correction of line transport motors of various sub-vendors.
3. Prepare the “motor list” (including list of feeders for sub-vendors, list of motors, list of instruments for CMI equipment and automation exchanges).
4. Prepare the electrical portion of technical specification (basic data, general functions, scope of work) of enquiries to various sub-vendors.
5. Issue enquiries to various electrical makers.
6. Prepare or revise the technical specification for electrical, automation and instrumentation of Main electrical supplier and of the various sub-vendors.
7. Compare the prices and scopes of various main electrical suppliers quotations.
Project stage (order stage) ：
1. Revise the final motor list.
2. Revise of final scope of supply/works of electrical & automation of main electrical supplies including electrical scope and electrical / automation interface of each sub-vendor.
3. Pilot, revise and control the electrical control general arrangement of the line.
4. Single line diagrams.
5. Physical location.
6. Space needed for Electrical rooms and main control pulpits.
7. Location of local control pulpits or panels.
8. Location of junction boxes.
9. Location of emergency stops panels or boxes.
10. Physical location of cable tunnels, cable trenches and cable pipes and checking of the arrangements made by Electrical supplier.
11. Checking for eventual interferences with hydraulic or pneumatic pipings.
12. Co-ordination between the various sub-suppliers electrical and automation.
13. Inspection of the various sub-vendors equipment electrical and automation portion.
14. Make the functional description (based on already existing documents).
15. Finalise the list of the various tractions in the various line section.
16. Pilot the sub-vendors work (project management of electrical).
17. Help solve the electrical problems on site if any.
Position requirement：
1. The work is more for a generalist and technical co-ordinator.
2. Priority is given to people having a minimum experience for electrical MV & LV, motors and drives and automation including PLC's.
3. Experience in participating to tender or project meetings for electrical portion is a definite asset.
4. Experience of work on similar functions for steel contractors or for a Steel Design and Research Institute is a definite plus.
5. Able to write and speak English fluently.
6. Able to travel extensively at home and abroad.
職位類別： 電氣工程師/技術員
舉報
儲能電氣工程師職業大全：
- 公司規模：50 - 99人
- 公司性質：中外合資
- 所屬行業：冶金冶煉
- 所在地區：北京-石景山區
- 聯系人：陳小姐
- 手機：會員登錄后才可查看
- 郵箱：會員登錄后才可查看
- 郵政編碼：100041
工作地址
- 地址：北京市石景山區實興東街8號院1號樓京漢大廈5層
