Key Accountabilities :
1.Carry on the Advance quality management in new project according to the customer APQP and BOS PEP+.
新項目時，根據客戶的APQP以及公司的PEP+流程，負責前期的質量管理。
2.Check customer quality requirements and standards and Define and create a Quality concept and Identification of costs for sales including Testing, gauges and Test & check equipment.
核對客戶的質量要求及標準，制定質量的概念，協助銷售部門核算測試、儀表和檢查設備的成本。
3.Start CTQ Process and Define critical quality features according to customer requirements and secure continuity.
啟動重要質量點流程，根據客戶需求及安全的連續性，定義關鍵質量特性。
4.Manage the APQP quality meeting at the customer for the target
- CPK´s, Re-qualification plan, PPAP scope, EOL gauge / acoustic gauge requirement ,Special ****ing conditions/Testing fixture, requirements of vehicle safety, Special **** requirement, crash ****, acoustic ****.
全面負責APQP質量會議管理：包括工程能力指數，再認證計劃， PPAP關注范圍、最終工站計量器/噪音測量要求，特殊的測試條件和測試夾具，車輛安全的需求，特殊的測試要求，碰撞測試，噪音測試等。
5.Manage the Advance quality planning with suppliers:
ISPO+ application to ABPT and Coordinate the sampling list into ISPO+ by DC-Admin
管理供應商前期質量：完成首批樣件的申請，與總部管理員協調，完成樣件清單。
6.Check and release Functional model ( Prototype ). Create the documentation of the prototypes including Control plan, measurement plan & report for BOS and create the quality records / documents for delivery to customers.
檢查，釋放功能性樣件。創建公司內部使用的樣件資料，包括控制計劃，測量計劃、報告等，以及交付給客戶的質量記錄，文件等。
7.Manage the necessary documentation of Initial Sampling release, PPAP release to customer and review at the customer
負責客戶的首批樣件認可和釋放、PPAP釋放及再檢查的所有文件，資料的收集，管理。
8.Quality review at the customer at project pilot phase.
客戶項目投產階段的質量檢查。
9.Draw up concept for functional, dimensional and material inspection. Illustration by design and track ECO.
起草功能概念,尺寸和材料檢驗方案。插圖設計并跟蹤工程變更。
10.Support the customer process audit and product audit.
支持客戶過程審核和產品審核。
11.Analyze the return prototype and deal with the customer complaint with customer service. Draft 8D report and get approval in case of prototype complaints and claims.
退回手工樣件品的分析，協助客服處理顧客的投訴。針對客戶手工樣件投訴，起草8D報告，并得到批準。
12.Any other works assigned by supervisors.
上級指定的其他任何工作。
Requirement
1. Above Bachelor's degree in Mechanical Engineering / Automotive Engineering and the relevant.
機械工程、汽車工程以及相關專業本科以上學歷。
2.More than 5 years related Roof quality working experience. Familiar with PPAP, Control Plan, 8D, MSA, SPC.
5年以上天窗質量工作經驗，熟悉PPAP, Control Plan, 8D, MSA, SPC。
3. Familiar with TS16949, Process Audit and Product Audit.
熟悉TS16949，過程審核和產品審核。
4.Experience and Good coordination with automotive OEM, FAW-VW, SGM, Daimler, BMW is preferred.
與汽車行業主機廠（FAW-VW, SGM, Daimler, BMW）有良好合作關系、經驗者優先。
5.Thorough knowledge of APQP, Quality Engineering and Supplier Management.
熟悉APQP, 質量工程以及供應商管理。
6.Ability to work under the challenge and pressure.
具有一定的挑戰能力和抗壓能力。
7.Exceptional organizational and communication skills with Fluent English in verbal and writing.
具備使用流利英語，進行組織及溝通的能力。
Woking Location 工作地點：
Jiangsu Taicang 江蘇太倉
1.Carry on the Advance quality management in new project according to the customer APQP and BOS PEP+.
新項目時，根據客戶的APQP以及公司的PEP+流程，負責前期的質量管理。
2.Check customer quality requirements and standards and Define and create a Quality concept and Identification of costs for sales including Testing, gauges and Test & check equipment.
核對客戶的質量要求及標準，制定質量的概念，協助銷售部門核算測試、儀表和檢查設備的成本。
3.Start CTQ Process and Define critical quality features according to customer requirements and secure continuity.
啟動重要質量點流程，根據客戶需求及安全的連續性，定義關鍵質量特性。
4.Manage the APQP quality meeting at the customer for the target
- CPK´s, Re-qualification plan, PPAP scope, EOL gauge / acoustic gauge requirement ,Special ****ing conditions/Testing fixture, requirements of vehicle safety, Special **** requirement, crash ****, acoustic ****.
全面負責APQP質量會議管理：包括工程能力指數，再認證計劃， PPAP關注范圍、最終工站計量器/噪音測量要求，特殊的測試條件和測試夾具，車輛安全的需求，特殊的測試要求，碰撞測試，噪音測試等。
5.Manage the Advance quality planning with suppliers:
ISPO+ application to ABPT and Coordinate the sampling list into ISPO+ by DC-Admin
管理供應商前期質量：完成首批樣件的申請，與總部管理員協調，完成樣件清單。
6.Check and release Functional model ( Prototype ). Create the documentation of the prototypes including Control plan, measurement plan & report for BOS and create the quality records / documents for delivery to customers.
檢查，釋放功能性樣件。創建公司內部使用的樣件資料，包括控制計劃，測量計劃、報告等，以及交付給客戶的質量記錄，文件等。
7.Manage the necessary documentation of Initial Sampling release, PPAP release to customer and review at the customer
負責客戶的首批樣件認可和釋放、PPAP釋放及再檢查的所有文件，資料的收集，管理。
8.Quality review at the customer at project pilot phase.
客戶項目投產階段的質量檢查。
9.Draw up concept for functional, dimensional and material inspection. Illustration by design and track ECO.
起草功能概念,尺寸和材料檢驗方案。插圖設計并跟蹤工程變更。
10.Support the customer process audit and product audit.
支持客戶過程審核和產品審核。
11.Analyze the return prototype and deal with the customer complaint with customer service. Draft 8D report and get approval in case of prototype complaints and claims.
退回手工樣件品的分析，協助客服處理顧客的投訴。針對客戶手工樣件投訴，起草8D報告，并得到批準。
12.Any other works assigned by supervisors.
上級指定的其他任何工作。
Requirement
1. Above Bachelor's degree in Mechanical Engineering / Automotive Engineering and the relevant.
機械工程、汽車工程以及相關專業本科以上學歷。
2.More than 5 years related Roof quality working experience. Familiar with PPAP, Control Plan, 8D, MSA, SPC.
5年以上天窗質量工作經驗，熟悉PPAP, Control Plan, 8D, MSA, SPC。
3. Familiar with TS16949, Process Audit and Product Audit.
熟悉TS16949，過程審核和產品審核。
4.Experience and Good coordination with automotive OEM, FAW-VW, SGM, Daimler, BMW is preferred.
與汽車行業主機廠（FAW-VW, SGM, Daimler, BMW）有良好合作關系、經驗者優先。
5.Thorough knowledge of APQP, Quality Engineering and Supplier Management.
熟悉APQP, 質量工程以及供應商管理。
6.Ability to work under the challenge and pressure.
具有一定的挑戰能力和抗壓能力。
7.Exceptional organizational and communication skills with Fluent English in verbal and writing.
具備使用流利英語，進行組織及溝通的能力。
Woking Location 工作地點：
Jiangsu Taicang 江蘇太倉
職位類別： 質量管理/測試工程師(QA/QC工程師)
舉報
- 公司性質：外資企業
- 所屬行業：零部件
- 所在地區：江蘇
- 聯系人：*
- 手機：會員登錄后才可查看
- 郵箱：會員登錄后才可查看
- 郵政編碼：624532
工作地址
- 地址：江蘇省太倉市經濟開發區人民北路169號
